Product ID:OLIN 1028 SCALE & CORROSION INHIBITOR 30 GALLON
MSDS Date:02/05/1982
FSC:6850
NIIN:00F017435
MSDS Number: BKVSS

Emergency Phone: (800) 432-6546

Info Phone: (800) 432-6546

Preparer: S. J. BARBEE PH.D.

Cage: 0G578

Telephone: 203-356-3449

Cage: 0G578

SODIUM PHOSPHATE MONOBASIC

CAS: 7558-80-7

RTECS: WA1900000

Fraction By Weight: 5%

LD50 LC50 Mixture:ORAL LD50 (RAT): 4,500 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF MUCOUS
MEMBRANES. SKIN/EYES/INGESTION: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION TO MUCOUS MEMBRANES.
EYES/SKIN/INGESTION: IRRITATION.

First Aid:SKIN/EYES: FLUSH W/WATER FOR 15 MINS. INHALATION: REMOVE TO
FRESH AIR. INGESTION: DRINK WATER & INDUCE VOMITING BY STICKING
FINGER DOWN THROAT. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:NON-COMBUSTIBLE
Extinguishing Media:WATER

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. DILUTE WELL W/WATER
& FLUSH TO DRAIN.

Handling and Storage Precautions:PROTECT FROM EXCESSIVE HEAT/FREEZING.
USE NORMAL PRECAUTIONS FOR HANDLING CHEMICAL MATERIALS. AVOID
CONTACT W/EYES/SKIN/CLOTHING. DON'T INGEST.
Other Precautions:FREEZING MAY CAUSE PRODUCT SEPARATION, BUT THOROUGH
MIXING AFTER RETURNING TO NORMAL TEMPERATURES RESTORES PRODUCT TO
FULL EFFECTIVENESS. AVOID INHALATION OF MIST. KEEP CONTAINER
CLOSED. STORE IN A DR Y LOCATION.

Protective Gloves:RUBBER OR PLASTIC
Eye Protection:SPLASHPROOF GOGGLES OR FACE SHIELD
Other Protective Equipment:APRON
Supplemental Safety and Health
CORROSION RATE (AT 130F FOR 7 DAYS): MILD STEEL (SAE 1020)= 11.4 MPY;
ALUMINUM (7075-T-6)= 1.1 MPY; STAINLESS STEEL (304)= 0.1 MPY. 8.7
LBS/GAL.

Boiling Pt:B.P. Text:>212F
Melt/Freeze Pt:M.P/F.P Text:30F
Spec Gravity:1.04
pH:5.3
Solubility in Water:COMPLETE
Appearance and Odor:NEARLY COLORLESS LIQUID W/SLIGHT AMMONIACAL ODOR.
Percent Volatiles by Volume:>90/WT
Corrosion Rate:SEE SUPP

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING, EXCESSIVE HEAT

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/RCRA, LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.